| | |
| RETURN TO - LIST FRAY CATEGORIES |
|---|
| What are you looking for? |  | | | | | | |
|---|---|---|---|---|---|---|---|
| FRAY RULES (14) | FRAY PARTS (86) | FRAY TOOL BOX (45) | FRAY HOW TO (10) | FRAY_CAR_BUILD (19) | FRAY LINKS (5) | FRAY VENDORS (10) |
| The FRAY TOOL BOX is a list of tools you should have in your tool box to work on your Fray Cars. | If you are looking for tools for your Fray Cars Build this list should help in your search. | The goal here is to show these tools and provide links to help order them for your next build. | If you are aware of additional tools and where to find them, do send me an email so they can be included here. | Use the filters below to limit the list to just the tool(s) your are seeking. |
| LIST OF FRAY TOOLS for All Categories |
|---|
| ID | Vendor | ItemCat | ItemManu | Product Code | ItemDesc | ItemImage | Item Price | Qty | Fray Appr | Outof Stock |
|---|---|---|---|---|---|---|---|---|---|---|
| 47 |  http://www.onestopslotshop.com | Pickup_Shoe_Sander | OneStopSlotShop | Pickup Shoe Sanders Pickup Shoe Sanders Abrasive plastic disks for cleaning and sanding pickup shoes. Disks are available in sets of three or mounted on a 1/8" mandrel. 220 grit (maroon) is for sanding the shoes flat and 400 grit (blue) is for light sanding and cleaning. |  | $4.75 - $6.50 | Yes | |||
| 48 | http://www.onestopslotshop.com | Magnet_Spacing_Tool | One Stop Slot Shop | Magnet Spacing Tool Precision machined at .700" (ECHORR/Fray Minimum) this tool is designed to fit in between the magnets on an Aurora Thunderjet/DASH chassis to accurately set the magnet distance. The edges are machined flat to prevent binding against the chassis walls. To assist in removing the tool from the chassis the tool comes with a knurled handle for superior grip. |  | $4.95 | Yes | |||
| 29 | http://www.onestopslotshop.com | Wheel_Press | Scale Engineering | 164-300 | Wheel Press includes Gear Adapter and .198" Post Adapters Post Adapters install opposite the screw. The Kit includes: (.170, 188, .228, .248, .258, .268, .278, .293, .308) Cap Adapters install on the screw end. The Kit includes: (.198, .213, .228, .248, .258, .268, 278, 293, .308) |  | $30.00 | Yes | ||
| 31 | http://www.onestopslotshop.com | Wheel_Puller | Scale Engineering | 164-310 | Scale Engineering Wheel Puller |  | $25.00 | Yes | ||
| 30 | http://www.onestopslotshop.com | Wheel_Press | Scale Engineering | 164-318 | Adapter Rack |  | $20.00 | Yes | ||
| 23 |  https://www.vrpslotracing.com/ | Dynos | VRP | Dyno20 | VRP Dyno 2.0 The VRP Dyno 2.0 is able to test all DC HO type cars. It measures the voltage generated by the internal motor that has been calibrated to approximately the same amount of drag it takes to propel most HO cars down the track |  | $180 | Yes | Yes | |
| 24 | https://www.vrpslotracing.com/ | Dynos | VRP | Dyno30 | VRP Dyno 3.0 The dynamometer is able to test all HO type DC cars. It measures the voltage generated by the internal motor that has been calibrated to create approximately the same amount of drag it takes to propel most HO cars down the track. The higher the meter reading the faster the car is going. |  | $255 | Yes | ||
| 14 |  http://www.flrproducts.com | Rivet_Press | FLR | flr-rivet-press | Rivet Press Rivet press for T-jet/Tough Ones/AFX chassis |  | $40.00 | Yes | ||
| 13 |  https://www.wizzardho.com/ | Break_in_Box | Lucky Bob | GS014 | Lucky Bobs Break In Box |  | $35 | |||
| 28 | https://www.vrpslotracing.com/ | Magnet_Down_Force_Tool | VRP | p-108 | VRP MDM (Magnet Down Force) Tool The Magnet Down-Force Meter does the following: 1 – It Individually measures the down force for the motor and traction magnets for all HO cars. 2- It measure the combine down force of the entire car combining the individual down forces of both motor and traction magnets. |  | $140 | Yes | ||
| 25 | https://www.vrpslotracing.com/ | Comm_Tool | VRP | p-133-commxl | Comm Tool XL for T-jets & AW Armatures The New Commutator XL is 44% larger than the original comm tool for a better grip when polishing the T-Jet commutator. The kit comes with 6 cutting disks (#400) for cutting, and 6 fine disks (#1600) for polishing. Each disk can be mounted on the cutting tools by removing the paper covering the double sided tape beneath. |  | $23.00 | Yes | ||
| 27 | https://www.vrpslotracing.com/ | Armature_Balancing_Tool | VRP | p-74 | VRP Balancer Tool The VRP Balancer © designed to balance motors to run at optimum levels. The balancer works with both inline or pancake motors. The motor spins almost on air between the two magnets on the tip of the adjusting screws. |  | $80.00 | Yes | ||
| 34 | https://www.vrpslotracing.com/ | Dynos | VRP | p-82 | Dyno 6 – AMP Power Supply The 4 – AMP Power Supply is specially modified to work with the VRP Dynos. The power supply provides 19.6 volts 4 amps to the Dyno and will power any HO type cars from T-Jets to Modified. |  | $65 | Yes | ||
| 35 | https://www.vrpslotracing.com/ | Dynos | VRP | p-90 | Dyno 4 – AMP Power Supply The 4 – AMP Power Supply is specially modified to work with the VRP Dynos. The power supply provides 19.6 volts 4 amps to the Dyno and will power any HO type cars from T-Jets to Modified. |  | $45 | Yes | ||
| 26 | https://www.vrpslotracing.com/ | Comm_Tool | VRP | p-92-comm-tool | Updated Comm Tool Set (for T-Jet & A/W) The Communtator Pack is designed to flatten and polish worn commutators |  | $28.00 | Yes | ||
| 16 | https://www.wizzardho.com/ | Peening_Tool | Wizzard | PeeningToolRC | T-Jet Hole Peening Tool This tool has been a staple since its release for tightening tolerances on most holes of your T-Jet |  | $30.00 | |||
| 3 |  http://rt-ho.com/index.html | Tech_Block | RT-HO | RT-052 | .0635" Full Length Drill Blank |  | $3.00 | |||
| 4 | http://rt-ho.com/index.html | Wheel_Puller | RT-HO | RT-300 | Armature Pinion Gear & Wheel Puller |  | $17.00 | Yes | ||
| 7 | http://rt-ho.com/index.html | Gear_Removal_Press | RT-HO | RT-300 | Armature Pinion Gear & Wheel Puller |  | $17.00 | |||
| 11 | http://rt-ho.com/index.html | Wheel_Puller | RT-HO | RT-310 | Wheel Puller |  | $?? | Yes | Yes | |
| 18 | https://www.wizzardho.com/ | Wheel_Puller | RT-HO | RT-310 | Wheel Puller Wheel Puller from RT-HO | | $30.00 | Yes | ||
| 12 | http://rt-ho.com/index.html | Wheel_Press | RT-HO | RT-380 | Wheel Press RT-380-305 .305 Anvil RT-380-265 .265 Anvil RT-380-213 .213 Anvil RT-380-187 .187 Anvil (Fits RT-205 wheels) RT-380-125 .125 Anvil (Fits all RT- Wheels except RT-205) |  | $?? | Yes | ||
| 19 | https://www.wizzardho.com/ | Wheel_Press | RT-HO | RT-380 | Wheel Press Wheel Press by RT-HO for all your wheel pressing needs, comes with a .198 anvil |  | $35.00 | Yes | ||
| 8 | http://rt-ho.com/index.html | Setup_Block | RT-HO | RT-420 | Set Up Block - Four Sizes on One Tool PAD HEIGHTS .008, .009, .010, .011 |  | $25.00 | |||
| 20 | https://www.wizzardho.com/ | Setup_Block | RT-HP | RT-420 | T-Jet Rail Pad Block(.008-.011) These blocks help with looking to see if your shoes are properly hitting the rail without constantly going back and forth to the track, recommend looking through a 10x magnifier for best results |  | $25.00 | Yes | ||
| 9 | http://rt-ho.com/index.html | Setup_Block | RT-HO | RT-425 | Set Up Block - Four Sizes on one tool Pad Heights .012, .013, .014, .015 | | $25.00 | |||
| 21 | https://www.wizzardho.com/ | Setup_Block | RT-HO | RT-425 | T-Jet Rail Pad Block(.012-.015) These blocks help with looking to see if your shoes are properly hitting the rail without constantly going back and forth to the track, recommend looking through a 10x magnifier for best results |  | $25.00 | Yes | ||
| 10 | http://rt-ho.com/index.html | Peening_Tool | RT-HO | RT-500 | Idler Post Expanding Tool |  | $?? | Yes | ||
| 22 | https://www.wizzardho.com/ | Peening_Tool | RT-HO | RT-500 | T-Jet Idler Post Expanding Tool T-Jet Idler Post Expanding Tool for tightening the idler gear on the top plate |  | $60.00 | Yes | ||
| 5 | http://rt-ho.com/index.html | Gear_Removal_Press | RT-HO | RT-550 | T-JET Gear Removal Press |  | $??.00 | Yes | ||
| 17 | https://www.wizzardho.com/ | Gear_Removal_Press | RT-HO | RT-550 | T-Jet Top Gear Removal Tool $68.00 The best tool for removing your top gears on your T-Jet, comes with the RT-560 to help with the bowing when removing an armature. |  | $68.00 | Yes | ||
| 6 | http://rt-ho.com/index.html | Gear_Removal_Press | RT-HO | RT-560 | Support Shim Support Shim for Gear Removal Tool prevents flexing of Gear Plate - Tempered Spring Steel. |  | $3.00 | |||
| 1 | http://rt-ho.com/index.html | Gear_Installation_Press | RT-HO | RT-600 | T-Jet Gear Installation Tool (with 3 Anvils) |  | $45.00 | |||
| 15 | https://www.wizzardho.com/ | Gear_Installation_Press | RT-HO | RT-600 | T-jet Gear Installation Tool RT-HO T-jet Gear Installation Tool for installing all of your gears with 3 Anvils |  | $45.00 | Yes | ||
| 2 | http://rt-ho.com/index.html | Gear_Installation_Press | RT-HO | RT-605 | Gear Peen Screw Optional Ball Tip Screw for Gear Installation Tool use to tighten hole in used gears |  | $7.00 | |||
| 49 | https://www.vrpslotracing.com/ | Spring_Resistance_Meter | VRP | SRMTool | VRP SRM Tool he SRM Tool (Spring Resistance Meter) does two things; first it accurately measures in 1/10 of a gram increments the “spring tension” on the pickup shoes one at a time for all HO cars both Pancake and inline motor type cars. |  | $110.00 | Yes | ||
| 37 |  http://www.scaleengineering.com | Comm_Tool | Scale_Engineering | TGT-1 | TJet Comm Plate Runout Indicator Use this Tool To Check the Runout of TJet Armature Comm Plates Tweek the plate around untill you achieve under .001 runout or better then glue the plate to the windings |  | $75 | Yes | ||
| 38 | http://www.scaleengineering.com | Gear_Removal_Press | Scale_Engineering | TGT-2 | TGT-2 TJet Pinion Puller When the Top Tjet racers in the country build their cars, they Indicate In the Top gear to Zero Runout. (Wobble) The bottom Pinion Gear wears over time and they need to replace the Pinion Gear without disturbing the Top Gear that they Indicated. |  | $25 | Yes | Yes | |
| 41 | http://www.scaleengineering.com | Pickup_Shoe_Bender | Scale_Engineering | TGT-3 | Pickup Shoe Bender Allows for repeatable Bends on TJet and Magnet Car Pickup Shoes |  | $50 | Yes | ||
| 42 | http://www.scaleengineering.com | Setup_Block | Scale_Engineering | TGT-4 | Shoe Setting Block Shoe Setting Block .008-.011 or .012-.015 or .012 -.018 |  | $9.95 | Yes | ||
| 43 | http://www.scaleengineering.com | Setup_Block | Scale_Engineering | TGT-5 | Flat Setup Block |  | $14.95 | Yes | ||
| 44 | http://www.scaleengineering.com | Guide_Pin_Trim_Tool | Scale Engineering | TGT-6 | Guide Pin Trim Tool Use Guage to trim Guide pin to repeatable depths |  | $16.95 | Yes | ||
| 46 | http://www.scaleengineering.com | Peening_Tool | Scale Engineering | TGT-7 | Chassis and Top Plate Hole Peener Chassis Peener Top Plate Hole Peener Will come w Two Screws!! 1 - Cone and Pin 2 - Round 3/16 diameter w Pin |  | $29.95 | Yes | ||
| 45 | http://www.scaleengineering.com | Rear_Axle_Pusher | Scale_Engineering | TGT-8 | Rear Axle Pusher Screw available for Crown Gear Removal |  | $24.95 | Yes | ||
| 36 | https://www.vrpslotracing.com/ | Dynos | VRP | Volt Amp | VRP Volt Amp Meter (Blue) or (Red) The Dyno Amp Meter measures current drawn by your car. The meter reads in milliamps, not amps. For example 50 on the meter = .05 amps, 200 = .2 amps, 447 = .447 amps etc. Reading in milliamps provides a more accurate current reading for precise tuning of the car. |  | $80 | Yes |
|